Marine Lines Clamp Cleat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A marine line clamp cleat is a stylish yet practical fixture that secures ropes on boats
- Ocena
- 5 / 5
- Polubienia
- 108
- Pobrania
- 444
- Wydruki
- 3
- Wyświetlenia
- 2146
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introducing the "Lines Clamp Cleat" – your rope's new BFF, ready to adapt to any roping adventure. This versatile design can scale like a champ, fitting ropes from burly 5mm mareline to any line you may want this clamp for. No rope feels left out!
Now, about those screws: on the model's size, M5 countersinks make sure your rope's not going anywhere. They're the bodyguards of the rope world. And guess what? They're beefy enough for any load the 5mm line throws its way.
Got a 4mm paracord with dreams of security? Simple fix: just give it an 80% makeover, throw in some M4 screws, and voilà – a paracord party.
So, ready for some mathematical wizardry? Do the cross multiplication dance and watch the clamp become your rope's new best fit!
Please print it at 45 degrees angle for ultimate strength vibes. 2mm perimeters wall, because thickness is the new black. Pump in 25% honeycomb infill – think of it as print yoga. And here's the fashion tip: dress it in light-colored PETG filament. It's like weather-resistant couture for your creation. Math + material = print perfection.
EDIT:
2023-09-01 : most efficient claws design, snap off built in support to avoid the small bridge.