1 / 6
Ikea Skadis Wera 950 Hex Plus (1,5-5mm) keys magnetic mount — zdjęcie 1
1 / 6

Ikea Skadis Wera 950 Hex Plus (1,5-5mm) keys magnetic mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic holder for Wera Type 950 Hex Keys (1,5mm - 5mm) for Ikea Skadis System (Remix)

Ocena
0 / 5
Polubienia
6
Pobrania
25
Wydruki
0
Wyświetlenia
439
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed only the small Wera Hex keys from 1,5 up to 5mm. So I remixed the model by jcq. Furthermore I had not the described magnets and thus had to adjust the magnets holes to 8x3mm an 5x2mm. Finally the hooks did not fit through my SKADIS holes (maybe due to tolerances when printing or because I used pets not ABS. ABS shrinks more than PETG).

So I chamfered the edges and slimmed down the hooks a bit for a better fit in my SKADIS board.

 

Thank you  jcq for the idea and the original model.

Material needed:

Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments.   I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so. 
And of course a like ♥ or a rating ⭐ of the design are always welcome. 

happy printing, clamikra

Tagi