1 / 5
Tiger | Boston | Replacement Soap dispenser reservoir
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The flimsy plastic reservoir of my soap dispenser (Tiger Boston) cracked, so I modeled a reprintable version.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The flimsy plastic reservoir of my soap dispenser (Tiger Boston) cracked, so I modeled a reprintable version. I've designed it from scratch, tooking measurement of what was left of the reservoir itself.
I've also made the walls 4mm thick so the chance of leaking is very low!
Although it could use some improvements, I think it came out pretty nice. It fits and works perfect!
Print recommendations:
| Material | PETG |
| Support | No |
| Layer height | < 0.20 mm |
| Walls | 4 (or 0.80 mm) |
Print it up-side down, like shown!
Enjoy cleaning your hands again!