1 / 8
Hanger fork adapter for Leifheit click system
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fork adapter for the Leifheit click system. This has to be combined with sleeve from @kevsparky.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a washing line in apartment which is hard to reach with hangers for smaller persons. So I designed this hanger fork to be fitted on the Leifheit pole. It makes it very easy to reach the hangers.
Thank you to @kevsparky to provide the base part for this model.
Required parts:
- 3x M3 threaded inserts
Print instructions:
- Filament of your choice, I used PLA.
- 0,2 mm layer height.
- 4-5 walls
- 20-30% infill
- NO supports needed
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.