1 / 6
Above Monitor Speaker Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clear up desk space by placing your speakers above your monitors at a 15 degree angle!
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 2208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Attach your speaker to your monitor stand pole, made for 35mm wide poles
4 screw holes in the plate, but you can also use double sided tape or just simply friction fit the speakers. I am using Klipsch R-14PM which are 147x190mm base.
This design uses:
- 2x M4x25mm screws (Attaches the plate to the pole)
- 1x M4x40mm screws (Holds the pole to the clamp, not obligatory)
- 2x M4x20mm screws (Holds the clamp tight on the monitor arm, not obligatory)
- 3x M4 nuts (Not obligatory if you didnt use the 40mm and 20mm screws)
Step-files included if you wish to edit it to fit your desktop setup