1 / 6
Pickle / Kimchi "Pusher" for IKEA 1.8l / 61oz glass container — zdjęcie 1
1 / 6

Pickle / Kimchi "Pusher" for IKEA 1.8l / 61oz glass container

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Push your fermented stuff "under the liquid" for safe fermenting. Fits this IKEA container: 292.690.74

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
523
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This is a pusher that keeps the veggies you want to ferment “under the liquid”.  It fits this IKEA glass container (same all over the world).  

Extra - I decided to punch a little hole in the plastic cover and install a vent - so air can get out, but not in which will make it last many months.  Those vents cost close to nothing on amazon so I didn't bother printing them (the rubber seal was too much hassle)

I printed in rough 0.28mm, 2 walls, 3 top/bottom layers, 15% infill in PETG

Be careful with food safety.  Generally speaking PLA/PETG is safe and I'll be using this as is, but keep in mind that with food contact there are many considerations that should be followed.

Great Picke Lady:

Tagi