1 / 6
Pickle / Kimchi "Pusher" for IKEA 1.8l / 61oz glass container — image 1
1 / 6

Pickle / Kimchi "Pusher" for IKEA 1.8l / 61oz glass container

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Push your fermented stuff "under the liquid" for safe fermenting. Fits this IKEA container: 292.690.74

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
523
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

This is a pusher that keeps the veggies you want to ferment “under the liquid”.  It fits this IKEA glass container (same all over the world).  

Extra - I decided to punch a little hole in the plastic cover and install a vent - so air can get out, but not in which will make it last many months.  Those vents cost close to nothing on amazon so I didn't bother printing them (the rubber seal was too much hassle)

I printed in rough 0.28mm, 2 walls, 3 top/bottom layers, 15% infill in PETG

Be careful with food safety.  Generally speaking PLA/PETG is safe and I'll be using this as is, but keep in mind that with food contact there are many considerations that should be followed.

Great Picke Lady:

Tags