Crayola Cap with anti-asphixiation holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap compatible with crayola markers for kids, remixed from an identical model but with added safety ventilation holes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
As stated in the description. Remix of a model by Steve Hanov which worked perfectly well but had no anti-asphyxiation safety ventilation holes. Therefore I put a few holes in the model, which work well and let air freely enough that one can breathe through them, but not freely enough that the marker dries out significantly more quickly.
Thanks to Steve for providing an excellent starting base, my daughter lost most of her caps in some god-forsaken part of the house and they will probably pop back out in 2059 :D
Printing tips:
Don't go too fast if your fan setup is not amazing, I printed at 70mm/s on an ender 3 neo with fan at full speed and it worked well. Definitely use a brim. You can also opt to set up a minimum layer time but not strictly necessary if you don't go too fast or if you are printing 5 or 6 at a time. No supports needed