Household ladder magnet safety clip (Trittleiter Sicherung)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My household ladder accidentally opens when moving it around. So I designed a magnet clips to prevent this.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My household ladder accidentally opens when moving it around. So I thought of a design for a safety hook to prevent this, see link. But this hook is not a fool proof design regarding usability. A friend of mine wanted to open the ladder and broke the hook because I did not tell him about it.
So I designed this magnet clips which hold the ladder shut for transport, but can be easily separated to open it up. Each clip is equipped with one magnet, super glued in. The clips are fixed to the ladder with zip ties. The clip is designed to fit a 25mm and 28mm pipe. But it might fit other diameters as well.
This clip is originally designed to fit a “Kraus Klapptritt Toppy XL” I purchased at the German hardware store Bauhaus, see link below.
Link to ladder hook: https://www.printables.com/model/220532-household-ladder-safety-clip-trittleiter-sicherung
Link to ladder: https://www.bauhaus.info/trittleitern/krause-klapptritt-toppy-xl/p/10090443
Parts needed
- 4x printed ladder clip
- 4x magnets, d=10mm h=1,95mm
- 8x zip ties, max. 4mm wide and 1,1mm thick
Assembly
- Glue magnets into clips. Pair them and make sure two face north side up and two face south side up. You can remove the magnet by pushing through the hole on the back.
- Zip tie the clips to the ladder. I recommend to put one clip on the ladder, close it and zip tie the second one so they match perfectly.
Print instructions:
- Recommended layer height 0,2 mm
- No supports needed
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.