Alcatel 1X 5059A & TCL L9 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cases for the Chinese brand TCL, model L9 and Alcatel 1X 5059A
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Originally published here: Alcatel 1X 5059A & TCL L9 case by tato_713 - Thingiverse
This was originally designed for the smartphone of the Chinese brand TCL, model L9. Some time after that, I discovered that it is the same phone as the Alcatel 1X.
Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.
This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.
For other phone cases check this.
Here is the explanation of the files names:
- Flex: made for elastic filaments like TPU. Tested on TPU.
- Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.
I spend part of my time making these models, letting them available and free for everyone. If you want to support my work, you can contribute with me here:
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
Doesn't matter
Infill:
Doesn't matter
Notes:
If you set the wall width to one filament line (0.4~0.6mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.