Pocket Doors (8x3mm round magnet version) for Lack Enclosure v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
@Drakka01's Pocket Door rails modified to fit 8x3mm round magnets instead.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I'm building a Lack Enclosure v2 with the Pocket Doors remix by @Drakka01, but couldn't find the necessary 20x6x2mm magnets anywhere (for a reasonable price), so I modified the door rails to fit 8x3mm round magnets that I already had on hand. My magnets fit well enough without glue that I can't get them out again.
I initially did this mod directly in Prusa Slicer (using negative and positive volumes), and I have uploaded those files as I have printed and verified them. If you for some reason want to use another slicer, I also attempted to recreate the mod in Fusion 360. These recreated models should be more or less identical, but I haven't printed them to verify myself.
Regardless, both versions should be easily adaptable to other sizes of round magnets. The Prusa Slicer modifiers can be resized quite easily within Prusa Slicer, and I included the .f3d file for the Fusion 360 recreation.