Modular Plant Climber/Supporting Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suitable for large or medium plants, modular design so go as high as you wish.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This Plant Climber/Supporting Frame design is very modular and could also be printed at 75% if needed. You can also use just three section to join up - pictures show four section per level.
For base you'll need the spikes which could be glued and then add the Stick and Frame, to go taller just add more sticks/frames.
I printed this in PLA but print with what filament you think best.
I've added print files (100% & 75%) with brim on Stick/Spike and supports on Frame, otherwise slice how you see fit.
BTW I had to borrow a neighbours plant to do photos 🤣
Designed in metric units, adjust in your slicer accordingly.
Please post pics of your finished model, give it a rating and kindly show us your prints.
I try to keep all my designs free & don't wish to move to Printables Clubs, a small donation via my Buy Me a Coffee would be kindly appreciated.
All my designs and images used are not commercial free and are copyright of ©D3DCreative
By downloading my models you may not share any of the Images/STLs/GCode etc to any other persons or platforms e.g. thingiverse/makerworld
By downloading my work you agree to the above terms set out by me.