1 / 11
Creality cr10s pro adapter for Mosquito hotend — zdjęcie 1
1 / 11

Creality cr10s pro adapter for Mosquito hotend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted a simple quick easy adapter for the mosquito magnum hot end so it could fit perfectly on the cr10s pro. Came…

Ocena
0 / 5
Polubienia
6
Pobrania
33
Wydruki
0
Wyświetlenia
384
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wanted a simple quick easy adapter for the mosquito magnum hot end so it could fit perfectly on the cr10s pro. Came out amazing and has been printing like a champ. You have to change the retraction. I found 2mm was pretty good for the 0.8mm nozzle

Print Settings

Printer Brand:

Up

Printer:

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2mm

Infill:

20%

Filament: Fillamentum Pla Wizards voodoo


Notes:

remove supports and insert screws on both sides. i used the washers on the second longest size and the longest ones screwed in on the other side. make sure everything is tight on the printer

Category: 3D Printer Parts

Tagi