1 / 8
Iphone 13 Holder for Volkswagen Polo 6R
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit the iPhone 13 holder according to the cup holder section of Volkswagen Polo 6R.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 2151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
If your vehicle is parked in a location where the temperature exceeds 80-85°F (27-30°C) during the summer months, please use PETG or ABS. At these temperatures, the inside of a vehicle parked in the sun can reach temperatures of 150°F (65°C). PLA starts to display structural changes at these temperatures.
You can see the application video from the following link:
Resolution:
0.2 mm
Infill:
%30
Filament material:
PETG
Nozzle:
0.4 mm
Support:
With support