1 / 9
Modular Buckle Bike Handlebar Phone Mount/Holder — zdjęcie 1
1 / 9

Modular Buckle Bike Handlebar Phone Mount/Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Buckle system for mounting an Smartish iPhone14 Pro Slim Case on a 31.8mm handlebar

Ocena
0 / 5
Polubienia
6
Pobrania
53
Wydruki
0
Wyświetlenia
810
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution
Motivation

I wanted a phone mount for my bike handlebars that didn't leave a bulky chunk of plastic behind when my phone wasn't mounted, and didn't require using zip ties any time I wanted to take it on/off. I was also playing around with 3D printed buckles, and so I made a modular buckle-style mount to mount things to the handlebars, and only leave a relatively low profile part fixed to the bike.

The buckle itself is also a pretty satisfying fidget toy.

Details

The part is designed to fit on the handlebars and over the stem of a 31.8mm diameter road bike style handlebar. The female base cleat stays attached to the handlebars, but can be removed by undoing a couple of M3 screws. The male clip piece is integrated with a phone holder that fits an Smartish iPhone 14 Pro Slim Case. There's also a male blank for remixing and test prints.

Recommended hardware:

  • 6x M3 locknuts
  • 2x M3x14 socket head
  • 2x M3x25 socket head
  • 2x M3x10 button/socket head
Printing Tips
  • The plastic parts that mate have a 0.1mm tolerance built in; do some test prints to make sure they will fit well (ie. no play in the buckle or connection between the buckle_F and clamp_[R/L]U)
  • If using supports on the clamp pieces, be sure to clean/sand them off thoroughly to prevent bending the parts.
  • I prefer to use ASA/ABS for things on my bike, but I did some test prints in PLA and they also felt pretty robust.
  • I printed test parts at 0.15 and 0.2mm layer heights and both worked.
  • Recommended slice orientation:

Tagi