Modular Buckle Bike Handlebar Phone Mount/Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Buckle system for mounting an Smartish iPhone14 Pro Slim Case on a 31.8mm handlebar
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 53
- Makes
- 0
- Views
- 810
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Motivation
I wanted a phone mount for my bike handlebars that didn't leave a bulky chunk of plastic behind when my phone wasn't mounted, and didn't require using zip ties any time I wanted to take it on/off. I was also playing around with 3D printed buckles, and so I made a modular buckle-style mount to mount things to the handlebars, and only leave a relatively low profile part fixed to the bike.
The buckle itself is also a pretty satisfying fidget toy.

Details
The part is designed to fit on the handlebars and over the stem of a 31.8mm diameter road bike style handlebar. The female base cleat stays attached to the handlebars, but can be removed by undoing a couple of M3 screws. The male clip piece is integrated with a phone holder that fits an Smartish iPhone 14 Pro Slim Case. There's also a male blank for remixing and test prints.
Recommended hardware:
- 6x M3 locknuts
- 2x M3x14 socket head
- 2x M3x25 socket head
- 2x M3x10 button/socket head
Printing Tips
- The plastic parts that mate have a 0.1mm tolerance built in; do some test prints to make sure they will fit well (ie. no play in the buckle or connection between the buckle_F and clamp_[R/L]U)
- If using supports on the clamp pieces, be sure to clean/sand them off thoroughly to prevent bending the parts.
- I prefer to use ASA/ABS for things on my bike, but I did some test prints in PLA and they also felt pretty robust.
- I printed test parts at 0.15 and 0.2mm layer heights and both worked.
- Recommended slice orientation:
