Honda ST1100 rear ABS sensor adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ABS sensor adapter for Honeywell 1GT101DC sensor
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
My ABS sensor was dead and tried to replace it with an aftermarket one, based on a youtube video I found.
Video here: https://youtu.be/rJDAhVeCUvY
Sensor used: Honeywell 1GT101DC
Sensor link: https://www.aliexpress.com/item/4000982835825.html?spm=a2g0o.order_list.order_list_main.28.7a2418027f58Yi
The project has 3mm on Z axis because my sensor holder was broken and I had to solder it back. As I measured, the adapter should have 4mm on Z axis but you can increase it in the slicer.
Distance between the sensor and the pulsar ring should be between 1 and 2mm.
Sensor schema:
Black & Red wire - Positive
Black wire - Negative
Black and white wire - Signal
For the motorcycle better measure and identify the polarity. For that, turn the ignition on and use a multimeter:
Positive - Should have around 12V (in my case was black)
Negative - Should have 0V (in my case was green)
Signal - Should have around 5V (in my case was blue)
Print in ABS with 100% infill and 0.1 resolution