Honda ST1100 rear ABS sensor adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ABS sensor adapter for Honeywell 1GT101DC sensor
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 53
- Makes
- 0
- Views
- 661
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
My ABS sensor was dead and tried to replace it with an aftermarket one, based on a youtube video I found.
Video here: https://youtu.be/rJDAhVeCUvY
Sensor used: Honeywell 1GT101DC
Sensor link: https://www.aliexpress.com/item/4000982835825.html?spm=a2g0o.order_list.order_list_main.28.7a2418027f58Yi
The project has 3mm on Z axis because my sensor holder was broken and I had to solder it back. As I measured, the adapter should have 4mm on Z axis but you can increase it in the slicer.
Distance between the sensor and the pulsar ring should be between 1 and 2mm.
Sensor schema:
Black & Red wire - Positive
Black wire - Negative
Black and white wire - Signal
For the motorcycle better measure and identify the polarity. For that, turn the ignition on and use a multimeter:
Positive - Should have around 12V (in my case was black)
Negative - Should have 0V (in my case was green)
Signal - Should have around 5V (in my case was blue)
Print in ABS with 100% infill and 0.1 resolution