Replacement sleeve for 24 oz ThermoFlask bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the flexible sleeve that slides onto the bottom of a 24-ounce ThermoFlask insulated aluminum bottle.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 348
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I take my ThermoFlask bottle to many places, and somewhere along the way I lost the sleeve. Putting the aluminum bottle down on hard surfaces can be a hassle (mostly because I forget the sleeve is not there and it hits the surface hard). So I decided to make a replacement. This is a 1:1 replacement for the sleeve that comes with a new bottle.
Print settings. I used a 0.6 nozzle but it is not strictly necessary. A 0.4 mm nozzle is probably fine.
- Filament: TPU (I used black Overture High Speed TPU, shore hardness 95A)
- 0.6mm nozzle
- 0.3 layer height
- 0.62 line width
- Outside wall order: infill/inner/outer (helps with the curve at the bottom, as TPU does not bridge well)
- Top surface pattern: Concentric
- Top shell layers: 4
- Bottom surface pattern: Monotonic
- Bottom shell layers: 4
- Internal solid infill pattern: Monotonic
- Sparse infill density: 100%
- Sparse infill pattern: Concentric
- No brim
Make sure to use a lot of cooling!
Designed in Fusion 360.