Replacement sleeve for 24 oz ThermoFlask bottle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replaces the flexible sleeve that slides onto the bottom of a 24-ounce ThermoFlask insulated aluminum bottle.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 63
- Makes
- 1
- Views
- 349
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Share Alike
I take my ThermoFlask bottle to many places, and somewhere along the way I lost the sleeve. Putting the aluminum bottle down on hard surfaces can be a hassle (mostly because I forget the sleeve is not there and it hits the surface hard). So I decided to make a replacement. This is a 1:1 replacement for the sleeve that comes with a new bottle.
Print settings. I used a 0.6 nozzle but it is not strictly necessary. A 0.4 mm nozzle is probably fine.
- Filament: TPU (I used black Overture High Speed TPU, shore hardness 95A)
- 0.6mm nozzle
- 0.3 layer height
- 0.62 line width
- Outside wall order: infill/inner/outer (helps with the curve at the bottom, as TPU does not bridge well)
- Top surface pattern: Concentric
- Top shell layers: 4
- Bottom surface pattern: Monotonic
- Bottom shell layers: 4
- Internal solid infill pattern: Monotonic
- Sparse infill density: 100%
- Sparse infill pattern: Concentric
- No brim
Make sure to use a lot of cooling!
Designed in Fusion 360.