1 / 3
Playable low-poly Toyota Supra
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stronger axles for more playability. Optimised for layer adhesion. No glueing required.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are 2 versions available.
The hex axle can be printed as a whole and then just be inserted into the car. But since the axle is not round, it does not turn that smooth.
The round one needs 2 per axle and they are just inserted into the car together and then hold together by the wheels.
I suggest to use the round axle and rub a bit of candle wax on them as lube.
You need to print:
- 4x wheel
- 4x round half axle
OR
- 2x hex axle
I tested both pla and petg and both work fine.
Print settings wheel:
- 0.2mm layer height
- 3 perimeters
- 3 top / bottom
- 20% infill
- support enabled
Print settings axle:
- 0.16 mm layer height
- 4 perimeters
- 5 top / bottom
- 40% infill (or go for 100%)