1 / 3
Playable low-poly Toyota Supra
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stronger axles for more playability. Optimised for layer adhesion. No glueing required.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are 2 versions available.
The hex axle can be printed as a whole and then just be inserted into the car. But since the axle is not round, it does not turn that smooth.
The round one needs 2 per axle and they are just inserted into the car together and then hold together by the wheels.
I suggest to use the round axle and rub a bit of candle wax on them as lube.
You need to print:
- 4x wheel
- 4x round half axle
OR
- 2x hex axle
I tested both pla and petg and both work fine.
Print settings wheel:
- 0.2mm layer height
- 3 perimeters
- 3 top / bottom
- 20% infill
- support enabled
Print settings axle:
- 0.16 mm layer height
- 4 perimeters
- 5 top / bottom
- 40% infill (or go for 100%)