1 / 7
The Prusa MINI IKEA KAPPLAKE Spot LED Light Upgrade — zdjęcie 1
1 / 7

The Prusa MINI IKEA KAPPLAKE Spot LED Light Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enhance Prusa MINI with IKEA KAPPLAKE light for better 3D printing. Tool-free install and convenient on/off.

Ocena
5 / 5
Polubienia
48
Pobrania
154
Wydruki
12
Wyświetlenia
1480
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Introducing an elegant and practical addition to elevate your Prusa MINI 3D printing experience – the Prusa MINI IKEA KAPPLAKE Spot LED Light Upgrade! This addon seamlessly integrates an IKEA KAPPLAKE Spot LED light to provide exceptional illumination for your printer, all while featuring a convenient built-in on/off switch.

The best part? No tools are needed for installation. Just slide the bracket over the Z-axis top until it clicks into place, and voilà – you're good to go. This user-friendly enhancement is designed to make your 3D printing journey smoother and more enjoyable. Illuminate your creativity with ease.

 

Key features
 

  • Easy to install, no tools required, no soldering required, just pull the cable together in the cable channel and fix the LED spot with the included double-sided tape. then push the bracket over the Z axis top until it clicks into place. If desired, the cable can be led down into the cable channel at the back of the mini.
  • Out of the way, the lamp is placed to the side so that it does not get in the way of the work, but the light is angled so that it focuses on the front in the middle of the printer area.
  • Built-in on/off button, yhe IKEA KAPPLAKE Spot LED has a built-in on and off button no extra effort needed.

 

Print instructions

The print settings are not highly critical. However, as a guideline, I used the following settings:

  • Filament Type: PETG
  • Layer Height: 0.20mm
  • Infill: 15% Gyroid
  • Supports: None (the part is specifically designed to be printed without supports)

These settings should provide optimal results for most applications.

 

Required parts

The only extra thing that needs to be used is the relatively cheap IKEA KAPPLAKE Spot LED  ($3.49 in US and 3.50€ in DE) *at the time of this posting

 

Assembly Instructions

  1. Pull the cable together in the cable channel 
  2. Fix the IKEA KAPPLAKE Spot LED spot with the included double-sided tape. 
  3. Then push the bracket over the Z axis top until it clicks into place. 
  4. If desired, the cable can be led down into the cable channel at the back of the mini.

Note: The tolerances are by intention designed a bit tight so that it sits firmly in place, however this means that you have to use a bit of force to press it into place.

happy printing

Tagi