Shattaf/Bidet/Shower Holder Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a replacement for the holder, decided to replicate the old one and use it for the bathrooms.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
INFO
The model is based on this holder:
Usually the holder is sold with the bidet as a set, but I only want the holder. So, I decided to print a replacement to lower the cost and to challenge myself with 3D modeling and gain more experience.
INSTALL
I used M4.7x60 mm screw to fix it on the wall. Also, you might want to lightly sand it just to make it more smoother and fit nicely.
NOTE
I added a new version without the screw and can be fixed using a double sided tape. Also added STEP files for anyone who wishes to edit/remix.
- material: PETG
- layer height: 0.2 mm
- Parameters: 3
- Infill: 5-10%
- color: make sure its Orange! 🍊