1 / 4
Shattaf/Bidet/Shower Holder Replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed a replacement for the holder, decided to replicate the old one and use it for the bathrooms.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 92
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
INFO
The model is based on this holder:
Usually the holder is sold with the bidet as a set, but I only want the holder. So, I decided to print a replacement to lower the cost and to challenge myself with 3D modeling and gain more experience.
INSTALL
I used M4.7x60 mm screw to fix it on the wall. Also, you might want to lightly sand it just to make it more smoother and fit nicely.
NOTE
I added a new version without the screw and can be fixed using a double sided tape. Also added STEP files for anyone who wishes to edit/remix.
- material: PETG
- layer height: 0.2 mm
- Parameters: 3
- Infill: 5-10%
- color: make sure its Orange! 🍊