1 / 3
IKEA TRYSIL Wardrobe Replacement Rail
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printable rail to replace broken IKEA TRYSIL wardrobe rail. Print vertically and as many pieces as needed
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
Replace your broken or worn-out plastic rail for the IKEA TRYSIL wardrobe with this 3D-printable rail designed for durability and a perfect fit.
Features:
- Designed to fit the IKEA TRYSIL wardrobe precisely
- Durable material ensures longevity
- Easy to install; simply slide it in where the old rail used to be
Printing Instructions:
For optimal strength, it is recommended to print the piece vertically.
Important: Print as many pieces as required to compose the entire rail.
Print Settings:
- Layer Height: 0.3mm
- Infill: 20% or higher for added strength
- Support: No
- Material: PLA or PETG
Installation:
- Remove the old, broken rail from your TRYSIL wardrobe.
- Clean the slot where the old rail was to remove any debris.
- Slide the 3D-printed rail(s) into place.
Disclaimer:
This is an unofficial replacement part and not affiliated with IKEA. Please use this part responsibly and at your own risk.