1 / 3
IKEA TRYSIL Wardrobe Replacement Rail
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable rail to replace broken IKEA TRYSIL wardrobe rail. Print vertically and as many pieces as needed
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
Replace your broken or worn-out plastic rail for the IKEA TRYSIL wardrobe with this 3D-printable rail designed for durability and a perfect fit.
Features:
- Designed to fit the IKEA TRYSIL wardrobe precisely
- Durable material ensures longevity
- Easy to install; simply slide it in where the old rail used to be
Printing Instructions:
For optimal strength, it is recommended to print the piece vertically.
Important: Print as many pieces as required to compose the entire rail.
Print Settings:
- Layer Height: 0.3mm
- Infill: 20% or higher for added strength
- Support: No
- Material: PLA or PETG
Installation:
- Remove the old, broken rail from your TRYSIL wardrobe.
- Clean the slot where the old rail was to remove any debris.
- Slide the 3D-printed rail(s) into place.
Disclaimer:
This is an unofficial replacement part and not affiliated with IKEA. Please use this part responsibly and at your own risk.