Bottom mounted Prusa mk3+ Lcd screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Regular Prusa mk3 LCD screen mounted on the side bottom frame using 3 hinges
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
On going effort to fit my Prusa in a cupboard matching the rest of cupboards under the stairs.
Mounted to the side aluminium frame using half roll in nut M4 x 2. I only had 15mm bolts and packed out for firm hold.
Have reduced the length of the Swivel arms to allow for the LCD screen to swing in and out in a reduced space, for storage and use. The original said an M4 x 25 bolt and nut were needed to hold the POST in place but cannot see how. Currently everything seems ok without a nut and bolt but will fit one guessing around 70 to 80mm is required
You will need to carrefully remove the LCD panel from its original mounting position and removing the ribbon cables. Disassemble the panel case and remove the support pieces that mount to the printer frame. Replace the supports and reassemble the panel cover.
I have attached an assembly picture which hopefully will make more sense than any of my scribblings.
11/09/23. Adding Onshape file link for Onshape users.
Step files added to help anyone wishing make changes.