1 / 6
My Rat Rig V-Core 3.1 accessories, mods and upgrades! — zdjęcie 1
1 / 6

My Rat Rig V-Core 3.1 accessories, mods and upgrades!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A collection of my accessories, mods and upgrades for Rat Rig V-Core 3.1.

Ocena
5 / 5
Polubienia
15
Pobrania
53
Wydruki
1
Wyświetlenia
1957
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Here I will upload my self-designed mounts and modifications for the Rat Rig V-Core 3.1 3D printer from time to time. 
I document the build of my V-Core on YouTube:

Rat Rig V-Core build series on My YouTube channel JanTec

At the moment I made the following mods:
- Raspberry Pi mount, with 4x M2 screws on the Raspi side and 4x M3 heat set inserts + screws for mounting to the Electronics Panel.
- Bracket for DC-DC converter using M2 screws and tape to the panel.
- Cover with holes for the wiring harness from the EVA and light on both sides (+ end stop on the left side). Mounted to the frame with two M6 screws and nuts.

More to follow soon! 

Tagi