HSW Wera Hex Inserts (0.9/1.3/1.5/2.0/2.5/3.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of inserts for the Honeycomb Storage Wall (HSW)
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 105
- Wydruki
- 2
- Wyświetlenia
- 897
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently started playing with the Honeycomb Storage Wall (HSW) and I bought a set of hex screwdrivers from Wera to do some maintainance on my Bambu X1C 😁
So obviously I immediately started to design something that would contain my Wera tools with a nice snug fit.
Print Settings
- Material: PLA
- Nozzle Size: 0.40mm
- Layer Height: 0.20mm
- 3 top / 3 bottom / 2 walls
- 15% Gyroid infill
- Supports Enabled
- Brim not needed
- Print in the orientation of the file
In the below picture you will see where to add supports that I found work best.
In my slicer (Bambu Studio) it also wanted to support the text on the front of the block, but I found that my X1C does a pretty good job with that little overhang and will print the icon and text just fine, so I made sure to prevent supports anywhere else on the model.

Multi-Colour Print
I intended for these prints to be multi-colour where the Hex icon and the number are in blue to match the colour of the handle of the Wera screwdriver. I uploaded a .3mf file where I have pre-painted the hex and numbers.
I used PolyTerra PLA (Charcoal Black & Sapphire Blue).

Let me know!
Please do let me know what you think of the design. I am open to feedback 😁👍
