HSW Wera Hex Inserts (0.9/1.3/1.5/2.0/2.5/3.0)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of inserts for the Honeycomb Storage Wall (HSW)
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 105
- Makes
- 2
- Views
- 897
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I recently started playing with the Honeycomb Storage Wall (HSW) and I bought a set of hex screwdrivers from Wera to do some maintainance on my Bambu X1C 😁
So obviously I immediately started to design something that would contain my Wera tools with a nice snug fit.
Print Settings
- Material: PLA
- Nozzle Size: 0.40mm
- Layer Height: 0.20mm
- 3 top / 3 bottom / 2 walls
- 15% Gyroid infill
- Supports Enabled
- Brim not needed
- Print in the orientation of the file
In the below picture you will see where to add supports that I found work best.
In my slicer (Bambu Studio) it also wanted to support the text on the front of the block, but I found that my X1C does a pretty good job with that little overhang and will print the icon and text just fine, so I made sure to prevent supports anywhere else on the model.

Multi-Colour Print
I intended for these prints to be multi-colour where the Hex icon and the number are in blue to match the colour of the handle of the Wera screwdriver. I uploaded a .3mf file where I have pre-painted the hex and numbers.
I used PolyTerra PLA (Charcoal Black & Sapphire Blue).

Let me know!
Please do let me know what you think of the design. I am open to feedback 😁👍
