Base molding for the camshaft bezel of some Fiat Palio car models.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,37 € – 0,45 € netto (bez VAT)
Dla pliku: base-molding-camshaft-bezel-4units.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,41 € netto (środek widełek).
- Masa podana przez autora
- 4 g
- Czas druku podany przez autora
- 28,8 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Teeth or claws that are part of the base mold for the gearshift hood frame of some models of Fiat Palio.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The file is of the teeth or claws that are part of the base mold for the gearshift hood frame of some models of Fiat Palio cars.
As these are older models, this part is difficult to find or too expensive for my liking.
And this part is part of a specific year in which the model of the car changed from one year to the next, where this part also underwent modifications.
Therefore, if you try to buy it online, you run the risk of being sent a different model due to the confusion caused by the change in the part's model and the change in the car's model.
Sorry about my English, I have to use the translator to communicate.
I used PETG because it's the only resistant filament I have.
It worked very well and was very strong.
I glued each tooth/claw into each broken space, I just had to sand down some of these spaces so that the piece could be fitted.
- In my case, 245 degree nozzle and 75 degree table
- No support required
- Filling with 25% threads
- No table grip required
See my video: https://www.instagram.com/reel/Cw8ZSv0v1wu/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==