Umikot 51s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I adapted the genius Umikot design for my Delonghi Dedica with a 51mm basket (aftermarket 18g basket with 25mm depth).
- Ocena
- 4,8 / 5
- Polubienia
- 90
- Pobrania
- 897
- Wydruki
- 5
- Wyświetlenia
- 6095
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stl files work for my case, in you'll need (in addition to the materials pointed out by redfoxdude) 4 3x10x4mm bearings (pressfit into spinring) and about 40x 4mm ball bearings.
EDIT: forgot to mention I also incorporated heatset inserts (m3x5mm) in the planetary gears.
Reworked kinda sloppily from @redfoxdudes design on onshape – you can adapt it from there as well if you want to, but some of the configuration features may be broken, so adapt at your own risk.
https://cad.onshape.com/documents/8fed27da3ccb16ffc1fb4d09/w/2a17cf10ec599bef5aafe909/e/a5a75a749be955674b0bdf3c?
follow instructions from Umikot58s page
EDIT 04/2024:
Added a new lugstand (Lugstand_DEDICA) for bigger (5x3mm) magnets and also space to fit more snug to the standard dedica portafilter.
Added a new spinring version to be used with a handle. Handle is connected with a heatset insert and m3 hardware.
EDIT 02/2025:
Updated the spinring with handle to better hold in the bearings.