1 / 3
Hneycomb Lamp — zdjęcie 1
1 / 3

Hneycomb Lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

RGB Design Lamp in Honeycomb Optics

Ocena
5 / 5
Polubienia
133
Pobrania
372
Wydruki
3
Wyświetlenia
3305
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Honeycomb NeoPixel Lamp

Please Note:

The multi material version is !!!UNTESTED!!!

General:

Arduino Sketeches and Wiring information can be found in the GitHub Repository:

https://github.com/fidoriel/HoneycombLamp

The inner shell needs to be printed with one perimeter. Make sure to use a 0.4 nozzle. otherwise it might not work.

You might need to adjust the outer wall diameter to 0.4.

Maby support is required for the cable cutout.

 

Print:

0.16 mm Layer hight
10% Infill
White PLA
0.4 mm Nozzle
good retraction settings needed
Pay attention that the inner shell has only one perimeter, so you need to adjust the shell diameter. Otherwise it will not be translucent.

Tagi