Hneycomb Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RGB Design Lamp in Honeycomb Optics
- Rating
- 5 / 5
- Likes
- 133
- Downloads
- 372
- Makes
- 3
- Views
- 3,305
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Honeycomb NeoPixel Lamp
Please Note:
The multi material version is !!!UNTESTED!!!
General:
Arduino Sketeches and Wiring information can be found in the GitHub Repository:
https://github.com/fidoriel/HoneycombLamp
The inner shell needs to be printed with one perimeter. Make sure to use a 0.4 nozzle. otherwise it might not work.
You might need to adjust the outer wall diameter to 0.4.
Maby support is required for the cable cutout.
Print:
0.16 mm Layer hight
10% Infill
White PLA
0.4 mm Nozzle
good retraction settings needed
Pay attention that the inner shell has only one perimeter, so you need to adjust the shell diameter. Otherwise it will not be translucent.