FlowHero No Clogger Alternative
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to be an alternative to the ever popular no clogger.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introducing FlowHero, a cutting-edge solution designed to enhance the efficiency of 3D printing processes. This indispensable tool simplifies the removal of obstructions in tubes, extruders, and nozzles, eliminating the need for time-consuming methods such as Cold Pulling and component disassembly. Experience a seamless and productive 3D printing workflow with FlowHero, leaving behind the hassle of frequent nozzle replacements.
This is designed to work with 1.5- and 1.75-mm rod of about 150 mm long.
As per picture number 2 you need to bend the end of the rod in an L type shape and slide it through the centre and then screw the cap on. I recommend using lubrication on the thread, but I do that with all my plastic threads.
If you like the design and wish to contribute.
For the Grip I used Makerlab TPU and glued it on and it ended up looking fantastic. 3D Printer Filament - 3D Printworx
If you wish to donate as a thanks, head to https://www.buymeacoffee.com/aussie3dmakers not necessary at all though :)