Alternative feet for Railcore Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two part feet that fit the stock Railcore® Mini: stiffer more stable footing by tying into the extrusion's profile.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a more rigid two part foot that ties a long m3 machine screw into the extrusion end as well as interfacing with the 1515 extrusion on both sides. This requires ultrasert II heat set inserts, I get mine from Filastruder. Others may work but the holes are dimensioned for these. I have provided a cutting template to use a craft knife along with the template to cut out some cork buna or cork neoprene sheet to fit into the bottom of the foot. Alternatively print the template in tpu or something and glue it in or use a double sided tape. Material for the foot itself is not critical, I used a CF Nylon. This is a load bearing mechanical part so choose slicer settings like wall thickness accordingly to how you have configured your mini and how high of accelerations you will run.