Cap for scuba cylinders (tanks)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap for scuba cylinders (tanks) from https://www.thingiverse.com/thing:4552099 by Luciano cunha
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 576
- Wydruki
- 6
- Wyświetlenia
- 1583
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Original:
I reworked the original to include a 3mm hole for a paracord to be added to the outside and a 2mm hole for venting in case someone opened the cylinder valve for safety.
All in english: Full cap and Empty cap
Tank dust caps for DIN scuba Cylinders (tanks) so you can see if a tank is empty of full.
Printed in PLA on Ender 5
Rafts:No
Supports:No
Infill:50%
Extruder temp: 220 C
Bed: 60 C
Support: none
Layer hight 0.12mm super quality
Mixed in Tinkercad
Sliced in Cura
Print with color painting (PETG) (Bambulab X1C):
Rafts: No
Support: Yes (PLA), Snug, on build plate only
Top Z distance: 0
Bottom T distance: 0
Base pattern spacing: 2mm
Interface pattern: rectilinear
Top interface layers: 3
Top interface spacing: 0
Normal support expansion: 0
Support/object xy distance 0.5mm