1 / 3
Redox Wireless Keyboard Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redox keyboard case with a cavity for a LiPo Battery
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is part of the QUASO project which adds LiPo Battery support to the Wireless Redox keyboard. This is a modification of the original Redox 3D printed case made by Mattia Dal Ben.
Changes:
- Add cavity for a 503035 battery and to route its wire to the QUASO PCB
- Add a ~3 degrees tilt to the case to keep the case mostly the same thickness while having enough space for the battery
- Hex insert for the nuts, making it much easier to assemble / disassemble
Printed in Hatchbox white PLA at 0.15 and 5% infill. I used supports for printing the screw holes on the backplate. In PrusaSlicer, I set the support style to "snug" to reduce the amount of support material on the exterior faces.
Hardware:
- 5x M3x8 screws
- 5x M3 hex nuts
- Double sided tape to hold the battery in place
- (optional) Rubber feet