1 / 3
Redox Wireless Keyboard Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redox keyboard case with a cavity for a LiPo Battery
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 26
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is part of the QUASO project which adds LiPo Battery support to the Wireless Redox keyboard. This is a modification of the original Redox 3D printed case made by Mattia Dal Ben.
Changes:
- Add cavity for a 503035 battery and to route its wire to the QUASO PCB
- Add a ~3 degrees tilt to the case to keep the case mostly the same thickness while having enough space for the battery
- Hex insert for the nuts, making it much easier to assemble / disassemble
Printed in Hatchbox white PLA at 0.15 and 5% infill. I used supports for printing the screw holes on the backplate. In PrusaSlicer, I set the support style to "snug" to reduce the amount of support material on the exterior faces.
Hardware:
- 5x M3x8 screws
- 5x M3 hex nuts
- Double sided tape to hold the battery in place
- (optional) Rubber feet