Dyson (Filament) Vacuum Bag Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A (filament) vacuum bag adapter for the Dyson vx hand vacuum series.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 236
- Wydruki
- 3
- Wyświetlenia
- 1764
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This adapter allows you to deflate your (filament) vacuum bags with your Dyson hand vacuum. A 3,5l standard bag can be vacuumized in 10-15s.
Please note, that this adapter will only fit v1..v7 models. Some models might also switch off due to the missing airflow.
Basically prints without support and brim, but I'd recommend a 5mm brim and organic support for the locking interface (as in the .3mf file) of the adapter part. 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or similar instead of PLA for a longer lasting model.
The suction ring part needs to be printed in TPU/TPE (max. shore hardness 95A) to be tight. A 0.4mm nozzle and 0.15mm layer height is recommended.
Simply press the suction ring over the adapter's frontside. It will lock into place.
And as for all my Dyson models: the first make wins a coffee. :-)