1 / 4
Lawnmower 519 BRI - Makita Battery Adapter — zdjęcie 1
1 / 4

Lawnmower 519 BRI - Makita Battery Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adapter allows to use a makita 10.8V battery as power source for the electric starter of the lawnmower 519bri

Ocena
0 / 5
Polubienia
0
Pobrania
19
Wydruki
0
Wyświetlenia
258
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The model requires one M4 screw, a threaded M4 insert, and two copper wires (1.6mm) where the isolation is removed.

  1. Melt in the threaded insert into the lawnmower part.
  2. Fiddle two separate copper wires (approx. 10cm long) through the holes of the lawnmower part and let 2cm sticking out the other end.
  3. Bend the other end of the copper wire upwards along the indent.
  4. Screw the model together with a fitting M4 screw
  5. Now lead the two copper wire ends looking upwards completely through the makita part where it says + and -
  6. Cut the excessive length of the wire so approx. 1cm is sticking out (maybe needs to be shortened a little bit. This part will directly touch the + and - contacts of the battery if they stick out correctly.
  7. The other end of the copper wire in the lawnmower part needs to be curled in, so they will touch the contacts of the lawnmower.

Tagi