1 / 4
Lawnmower 519 BRI - Makita Battery Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter allows to use a makita 10.8V battery as power source for the electric starter of the lawnmower 519bri
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
The model requires one M4 screw, a threaded M4 insert, and two copper wires (1.6mm) where the isolation is removed.
- Melt in the threaded insert into the lawnmower part.
- Fiddle two separate copper wires (approx. 10cm long) through the holes of the lawnmower part and let 2cm sticking out the other end.
- Bend the other end of the copper wire upwards along the indent.
- Screw the model together with a fitting M4 screw
- Now lead the two copper wire ends looking upwards completely through the makita part where it says + and -
- Cut the excessive length of the wire so approx. 1cm is sticking out (maybe needs to be shortened a little bit. This part will directly touch the + and - contacts of the battery if they stick out correctly.
- The other end of the copper wire in the lawnmower part needs to be curled in, so they will touch the contacts of the lawnmower.