3D Printable Flower Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printable Flower Pot
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 172
- Wydruki
- 4
- Wyświetlenia
- 1161
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this is a flower pot, you can put small items inside it, like paper clips and thumbnails...
The soil and pot models can change with each other, also you need to cut a piece of filament as the stem.
No supports are needed when printing, but the petals model needs 2-3 layers of a raft to make it steady on the hotbed. If some petals have flaws, you can print the "Flower-Petal-Single" model to replace it, this part also needs a raft when printing.
The "Flower-Stamen" part recommends printing height at"0.1mm", others"0.2mm".
There is a special free one at:
https://makerworld.com/en/models/15126#profileId-14880
There are some other flower pots based on the real plants at:
https://www.myminifactory.com/object/3d-print-325400
https://www.cgtrader.com/profile/models/4542826/
