Pi Zero Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shelf allows you to stack neatly between 2 and 6 Raspberry Pi Zeros encased in a minimalist case. I'm using the…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This shelf allows you to stack neatly between 2 and 6 Raspberry Pi Zeros encased in a minimalist case. I'm using the Zebra Zero Heatsink Case – Raspberry Pi Zero/Zero W/Zero 2 from C4Labs - https://www.c4labs.com/product/zero-heatsink-case-raspberry-pi-zero-w/ but any similar case with just a top and bottom should also work. Clearance may be an issue otherwise.
Note: There is no access to the GPIO pins when using this case. It is meant for running your Pi Zeros in a headless mode.
Choose from 2 high-level options:
- Slots for power and HDMI access
- Slots for power only access
The shelf prints in a single body. Files include 2, 3, 4, 5 and 6 shelf versions.
Measurements:
With the case on the Pi Zero, it measures 2.75" wide x 1.25" deep x 9/16" high. A tolerance of 0.08" has been added to allow a little clearance on all sides within each shelf slot.
The outer wall and shelf thickness is 0.05"
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
20%
Filament: Comgrow PLA Black
Notes:
Printing with supports may add up to an additional hour to the print time. They may or may not be necessary for your print. Be cautious when removing them.
Category: Computer