Drawer rail for Jysk closet Hagendrup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a rail for the drawer section on the Jysk closet "Hagendrup" but will probably fit other drawers with same size.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original rail snapped in two parts so it was impossible to get the drawer all the way in. I constructed this and it worked great.
To minimize supports and still have some strength i constructed it with a 0,2 mm raft and printed it with corner/raft against the bed. I did have to put organic supports under the pegs to get the best result. The raft can easily be torn of afterwards and the edges cleaned up.
I have added files both with and without raft for freedom of printing. The print fits on Prusa MK4 when placed diagonally.
Printed with Input Shaper.