Liczymy pasujące modele…
THIS IS MY DESIGN PORTED FROM THINGIVERSE This design was created in 2018. Now there are much better designs. Keep that in mind. I designed a filament drybox to keep filament dry and clean. So far it hold up to 5 filament spool each 1 kg.…
Slightly higher sofa leg for a Jysk sofa so a robotic vacuum can get under it.
This is a replacement part for the JYSK MARLEV bed couch (see product page ). The original part (marked E in the assembly manual) supports the pull-out bed mechanism and prevents it from sliding out too far. The model replicates the…
THIS IS MY DESIGN PORTED FROM THINGIVERSE This design was created in 2018. Now there are much better designs. Keep that in mind. I designed a filament drybox to keep filament dry and clean. So far it hold up to 5 filament spool each 1 kg.…
I made this functionality expander for the Jysk Abildskov movie-theater style couch to increase functionality of the built in cupholders. It just slots into original location, and can hold multiple things, sauces for your chip dipping…
Maybe it also fits for other similar models like "Bredsten, "Sirdal", "Larvik" or "Mysen". I cannot verify it.
Replacement adapter to attach a tube to the bottom of the blinds as a weight.
This clip is designed to secure blackout roller blinds closer to the wall, ensuring a snug fit and minimizing light gaps. Print instructions: - No supports required
Bought a cheap wardrobe (too cheap, may be) which collapsed after moving too much stuff into it. These connectors were used to repair it. The small cylinder is only if you have the need to reinforce one of the tubes if it is folded.…
"I accidentally broke one of the end caps on my chair, which I bought at Jysk. The model is called Pebringe / New York. The end cap is a very snug fit, so I had to use a hammer to plug it in."
The insert for the endstop part of the rollerblind botom holder. Made for use with this project .
I liked both designs of this holder, yet I needed it to hold on the wall by itself, like the original non-motorized one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: doesn't matter…
I was looking for a cheap filament rack and JYSK BORNHOLM was a really cheap choice (around 7€). Only flaw was that the filament could not be put standing into it, so it was a little bit impractical. Solved it by extending the rack…
Abstandshalter für 50mm-Fußdurchmesser. (leicht konisch mit ca. 48mm unten und 50mm oben) P.S. Das erste Bild zeigt die Couch im noch angehobenen Zustand.
Náhrada držáku pojezdu šuplíku v starém konferenčním stolku z JYSKu. Původní plastové držáky prostě po několika letech nevydržely. Ostatně vzhledem k jejich konstrukci se není co divit.
Adapter for the "Jysk HANS" shoe rack. Increase the distance to the floor so that shoes can be stored under the rack.
The original handle is a weak plastic and one of them broke after one day. So i had to model and print it.
Replacement for the brackets of the older style of JYSK roller blinds. To get sturdy parts print with 6 walls and 20-30% infill and at least PETG. Prints without supports as there is only a small bridge.
The NYORD insect screen has one small flaw: the hook in the frame for closing the insect screen is very fragile and prone to breaking. Unfortunately, JYSK doesn't offer a replacement for the hook; instead, they send you a NYORD insect…
Spare part for JYSK FEMRIS window blinds. This part is used to attach the blind assembly on the window frame. I printed this using PLA and recommend printing this “standing” otherwise the individual “teeth” which hold this part in its…
The original adapter is not compatible with the JYSK BOLGA Blackout roller blind, because it has a notch on the inside that holds the fabric:
Created for the Jysk Fandrup closet. There are 2 models. The ORG and the GEN (see filenames). Both have the holes at same distance from eachother as the original hanger. The ORG is made to fit the original (wide) screws. The GEN is made…
There are 2 versions here (v2 & v3). V2 has thicker sidebars, to hopefully prevent the corners from breaking. If you like it more like the original, then v3 is an exact copy of it. Print on it's side. The settings i used were:…
For my filament storage, I changed to a book case. I was looking for a case with enough shelves. The shelves shouldn't be too wide. Most spools are 20cm diameter so the shelves should be that or slightly bigger. The case I found has…
I created this nail holder just in case the original should break. It is modeled after the one in the photo (with its dimensions). The hole for the nail is 10mm from the wall. You can print this any resolution you like, but it's best at…
Recreated the plastic holder my Jysk clothes hanger has that has snapped from pressure.
Slightly higher sofa leg for a Jysk sofa so a robotic vacuum can get under it.
Padded feet for Jysk Nederby chairs. A washer is integrated into the print to spread the weight of the hollow-ended chair leg and prevent it from destroying the structure. !! Make sure your washer fits perfectly and does not stick out…
I purchased some roller blinds from the Danish shop “JYSK”, which unfortunately was a bit incompatible with the adapters delivered with the Zeinsmart zigbee roller blind motor - so I had to create my own version of the adapters, so the…
I bought an AM43 a year ago. I didn't like the chain drive, so I made a direct drive. It's a lot quieter and the speed is better too. Easy to install, just two 4x40 or 3.5 x 40 mm screws. Printer: Prusa MK3S+ Material: PLA real (Temp: 200…
This is a replacement part for the JYSK MARLEV bed couch (see product page ). The original part (marked E in the assembly manual) supports the pull-out bed mechanism and prevents it from sliding out too far. The model replicates the…
I lost the feet from my chairs, so I decided to design and print them. Printed with PETG with 0.16 layer height. No support required. Internal thread suppose to make better adhesion to the chair leg, but does not fit as tight as it…
Basically a key hole mount and a power strip stabilizer to keep it tight, the models are 2x the size-just reduce it in the printer's software by 50%.
This curtain rod endcap is for JYSK or similar rods. We lost one endcap in moving so I printed a one. This is printed in two pieces and glued together with superglue. I printed it with gray ABS. but PETG would do also. PLA I do not…
The 35 mm increase was created for a Roborock S7. The original wardrobe GUDME was bought online: https://jysk.de/aufbewahrung/kleiderstander/kleiderstaender-gudme-doppelt-schwarz-chrom
We dind't like the chairs that came with the table originally, so bought different ones. Table needed to be higher.
I made this functionality expander for the Jysk Abildskov movie-theater style couch to increase functionality of the built in cupholders. It just slots into original location, and can hold multiple things, sauces for your chip dipping…
I have noticed most people prefer to buy the IKEA Samla box to store filament. I found the Jysk Probox one to be much more to my liking. However, as you might notice it only comes with 2 clips (which secure it pretty well in my opinion),…
I made it so: PETG Resolution 0.20 QUALITY Infill 30% Perimeters 8 Solid Layer T10 B6
Nožičky k botníku, trubičkový systém JYSK, nožičky zvýšily stabilitu. Případně se dá i zvětšit ploška nožičky. Průměr konstrukce 14mm, nožičky drží festovně. PETG vrstva 0,2 výplň 15%
Maybe it also fits for other similar models like "Bredsten, "Sirdal", "Larvik" or "Mysen". I cannot verify it.
Replacement adapter to attach a tube to the bottom of the blinds as a weight.
This clip is designed to secure blackout roller blinds closer to the wall, ensuring a snug fit and minimizing light gaps. Print instructions: - No supports required
These adapters are for the Zenismart type roller motors sold in places like Aliexpress. They are designed for Jysk blinds but might fit others as well. My blinds are a bit older and newer ones might be different. I printed in ABS with 6…
Wall mount for shower curtain rod from JYSK. No support needed.
End-cap for Jysk Jonstrup chair legs. Printed with TPU 100% infill. Recommend printing it upright with the "bottom" pointing up. This model is re-uploaded to Printables as it's easier to find here than on thingiverse. Design is done by…
Suggesting to print in PETG. Use contact glue and press-on + glue the metal parts for magnetic connection.
Filament Storage Solution (Jysk 32L Box) – Holds up to 8 Spools This is a 3D-printed storage system designed specifically to fit the Jysk 32L plastic storage box (Probox). It allows you to efficiently store and protect up to 8 filament…
My new blinds were missing an end cap in the box so I designed and printed one.
Only made the one side since that's the only one that broke.
Adapter set to use the Bofu ES16xx roller motors sold by M.nu: https://www.m.nu/z-wave/rullgardin-markis with some roller blinds from Jysk that has a larger inner diameter than what the adapters sold by M.nu permits. Originally published…
I made this 1cm riser so that my kids chair would fit under the table. Print with 30%+ infill.
Replacement Clip for JYSK Ullehuse Garden Lounge. Ersatzverbinder für JYSK Ullehuse Garten Lounge Print Settings Printer Brand: Anycubic Printer: i3 Mega Rafts: Doesn't Matter Supports: No Resolution: Dosen't Matter Infill: 25 Filament:…
I got an older Jysk Tistrup desk that i needed to get 5 mm higher, so it is in level with my second desk. They fit perfect,and doesnt need any glue to hold them in place. Can also be used as replacement if the original rubber feets are…
I made a simple CLIP for the Jysk box (Probox). I use these boxes to store filament and wanted to seal the box as tightly as possible. https://jysk.cz/ulozne-prostory/kose-kosiky-atd/ulozne-systemy-plast/ulozny-box-probox-32-l-s-vikem-cira
The spindle part on my Jysk Trondheim hanging parasol broke, rendering it unusable. Couldn't get the spare part, so I designed it based on the broken one. Works perfectly, but it's a tight fit (probably due to the layer lines), so a lube…
Jysk židle: https://jysk.cz/zahrada/zahradni-zidle/kov/vyplet/zidle-ilderhuse-prirodni-0 Onshape: https://cad.onshape.com/documents/bc561bdafc5a34f6443b8df5/w/31d572e4c1ea76092243111a/e/b8a5dd0946de56100bcdbccb
Got requested to adapt my previous design for 34mm roller blinds to fit the newer style of 25mm roller blinds from Jysk. This set is untested since the requester never replied after these were done, so if you print these, please provide…
Schlitten für den Antrieb (DL-DT1005) für den JYSK-Fernsehsessel Der Schlitten beinhaltet das 2x14x8 Trapezgewinde oder andere Modell mit Trapezgewinde 2x14x6 Er ist einfach zu tauschen, in dem man die Antriebsverkleidung öffnet. Die…
Ich brauchte einen Adapter für den Wasserhahn Speingbrunnen von Dänischen Bettlager.
Prints successfully on Prusa mini+ using PLA and default settings in prusa slicer /w Brim for stability
Bought a cheap wardrobe (too cheap, may be) which collapsed after moving too much stuff into it. These connectors were used to repair it. The small cylinder is only if you have the need to reinforce one of the tubes if it is folded.…
First try on making a replacement bracket for the old style of mounting bracket for pleated blinds from Jysk. Printed with PLA and it has been working fine for a few weeks now.
Strong spare support to replace the original window support JYSK HVEN pleated blind for 23 mm PVC windows. Support de rechange renforcé pour remplacer le support de fenêtre d'origine du store plissé JYSK HVEN pour fenêtre PVC 23 mm.
The original rail snapped in two parts so it was impossible to get the drawer all the way in. I constructed this and it worked great. To minimize supports and still have some strength i constructed it with a 0,2 mm raft and printed it…
Ahoj, vymodeloval jsem dle originálu 1:1, vyzkoušeno, sedí. Nebavilo mě stále kupovat náhradní sadu dílů k roletám, které nevydrželi ani měsíc a roleta mi non-stop padala z okna. Když mám už doma tu 3D tiskárnu a Fusion, proč vlastně…
Spare hinge for loungechair Hanstholm (Jysk). Print with supports.
I made a small organizer for my lamp cable. This model supports cables up to 6mm in diameter but if any of you have a smaller or larger cable, please let me know so I can add new models! Tistrup Shelf - Link If you found this helpful,…
I have some aluminium chairs for my balcony an I noticed that one of the feet was missing. I created this design to plug the hole so the aluminium does not scratch the floor. The STL and GCODE files included here are a good fit for the…
Adjustable covers for JYSK shelf type TREPPEDAL. A better solution for wooden floors.
Jysk Kommode - Ersatz für gebrochene Auszugsschienen, verstärkte Ausführung Länge 210 mm, 4-5 mm längere Schrauben verwenden Jysk dresser / cupboard Replacement for broken drawer slide, stabilized version Length 210 mm, use 4-5 mm longer…
Print details Layer height: 0.15mm Infill: 100% Supports: No Materials: Any Non-printable parts Original JYSK gears Post processing Clean-up the supports Attach the original gears *Printed and tested on a Voron 0
Print knee_link 4 times, they connect into two "legs". Print 6 tube_endcap's and place them into tubes Connect everything together
Replacement latch tongue made for the EVETOFTE shoe cabinet from Jysk but it should work for all similar latching locks. It should work for similar mechanisms as well. For further details please check the attached picture with the…
Designed to fit frames of width 21mm there is slightly more space towards the edges to allow for screw heads. printed with 20% infill which seemed fine, but might need more depending on the carrying weight of TV unit printed without…
Pevější držáky na garnyž z Jysku. https://jysk.cz/okno/garnyze/garnyze/garnyz-madrid-125-215-cm-bila
Replacement door hinge for the KJELLER garden cabinet from JYSK for case of its destruction. Created for PLA filament.
These risers raise the table 4cm so a wider variaty of chairs can fit under the table. I have included the Fusion file if you want to change something.
Press into the grooves in the roller blind tube during installation
These are used on Jysk pavillion(s) as beam stubs, they come as standard (but very easy to loose) to help with fabric tension. If lost and you use beam without them, fabric might be damaged. Of course I've lost one and had to design…
The part that clips into the holder mount. Make sure you print it on the side becuase of serrated part
My chairs frame broken, so I designed a replacement. Works fine with the original screws
