Nail holder & spacer for JYSK / IKEA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nail holder & spacer for JYSK / IKEA furniture backplates.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
I created this nail holder just in case the original should break.
It is modeled after the one in the photo (with its dimensions).
The hole for the nail is 10mm from the wall.
You can print this any resolution you like, but it's best at 0.2mm or lower.
Printing should take about 10-12 minutes (15-20% infill).
A handy tool that holds nails at a fixed distance from the board’s edge,
guiding accurate hammering into a backboard during furniture assembly.
Perfect for clean, consistent results—especially with JYSK / IKEA-style builds.
Just print it on it's back, flat on the build plate.