1 / 7
Whisker City Mini Cat Tower & Cushioned Perch Upgrade Support — zdjęcie 1
1 / 7

Whisker City Mini Cat Tower & Cushioned Perch Upgrade Support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you've bought a Whisker City® Mini Cat Tower you may have noticed the upper bowl get's pretty wobbly and weak.

Ocena
0 / 5
Polubienia
7
Pobrania
22
Wydruki
0
Wyświetlenia
430
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

If you've bought a Whisker City® Mini Cat Tower & Cushioned Perch you may have noticed the upper bowl get's pretty wobbly. It is held in by a single screw, and is made out of styrofoam. Ours lasted a month or so before the styrofoam collapsed under the strain. We ended up getting a replacement, so I designed this support to take some of the strain off of the screw and styrofoam.

So if you are one of the unfortunate souls that purchased the Whisker City® Mini Cat Tower & Cushioned Perch without noticing it's 1 star rating on Petsmart, this may help you out.

I made mine out of PLA+, but I imagine any rigid filament should work fine. I've only had it installed for a few days, but it does seem a lot more stable.

Took about 14 hours to print on my Ender 3, sliced on Cura 4.3 at 100 mm/s and .2 layer height. You may be able to get away with less infill. Used approximately 93 m of filament.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

%10%

Filament: Sunlu PLA+ Grey

Category: Pets

Tagi