Whisker City Mini Cat Tower & Cushioned Perch Upgrade Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you've bought a Whisker City® Mini Cat Tower you may have noticed the upper bowl get's pretty wobbly and weak.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 22
- Makes
- 0
- Views
- 430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
If you've bought a Whisker City® Mini Cat Tower & Cushioned Perch you may have noticed the upper bowl get's pretty wobbly. It is held in by a single screw, and is made out of styrofoam. Ours lasted a month or so before the styrofoam collapsed under the strain. We ended up getting a replacement, so I designed this support to take some of the strain off of the screw and styrofoam.
So if you are one of the unfortunate souls that purchased the Whisker City® Mini Cat Tower & Cushioned Perch without noticing it's 1 star rating on Petsmart, this may help you out.
I made mine out of PLA+, but I imagine any rigid filament should work fine. I've only had it installed for a few days, but it does seem a lot more stable.
Took about 14 hours to print on my Ender 3, sliced on Cura 4.3 at 100 mm/s and .2 layer height. You may be able to get away with less infill. Used approximately 93 m of filament.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
%10%
Filament: Sunlu PLA+ Grey
Category: Pets